Glossaire des icônes Onshape classées par catégorie Général, Type d'onglet et Lignes de document. Les tableaux de chaque ligne indiquent les noms et les actions des boutons, ainsi que les descriptions des indicateurs.

General
Bouton Nom Action
Copier le lien Copy document URL at this tab and workspace or version.
FeatureScript notices View FeatureScript notices.
Notifications View in-app notifications.
Gestionnaire de tâches View all action items.
App Store Go to App Store.
Centre d'apprentissage Go to Learning Center.
Help Menu View Help Menu.
Measure details Show measure details.
Outils d'analyse Show analysis tools.
Mass and section properties Display mass and section properties.
Add Creates a new item and adds to the current list or collection.
Gestionnaire d'onglets Opens the tab manager panel.
Insérer un nouvel onglet Inserts a new tab into the Document.
Search Search for an element.

Document panel

Bouton Nom Action
Versions et historique Display where you can branch, merge, create new workspaces, and view changes and releases.
Compare history entries Vous pouvez créer des versions (qui sont en mode Lecture seule) et ramifier une version pour créer un nouvel espace de travail. Vous pouvez également comparer les entrées de l'historique dans les espaces de travail et les versions, ainsi que toute combinaison des deux. Pour plus d'informations, consultez la section Comparaison.
Repair Onshape fournit un mécanisme permettant de faciliter graphiquement la correction de références rompues à n'importe quel point de l'historique : Vue en cours de correction. Dans la plupart des cas, cette opération est lancée après la modification d'une dérivation ou importation d'une fonction vers une nouvelle pièce de base, ce qui entraîne la rupture des références dans le Part Studio. Un panneau des corrections s'ouvre à droite du Part Studio pour vous indiquer où les réparations sont nécessaires.
Hide/show merges Onshape fournit un mécanisme de fusion à partir d'une version de document ou d'un espace de travail (appelé source) dans votre espace de travail de document actif (appelé cible). Plus précisément, lorsque vous fusionnez une source sélectionnée (espace de travail ou version) dans la cible active (espace de travail), toutes les modifications apportées à la source sont fusionnées dans la cible, y compris toutes les fonctions, les onglets, etc.
Hide/show automatic versions Displays or suppresses automatically created version entries in the Versions and History timeline.
Create version View the Create new version dialog.
Dépouilles de release View draft release candidates saved in that document.
Commentaires View comments for the active document in the Document panel.
Filtrer Filter comments according to: comments in the Entire document or comments in this workspace only.
Filtrer  
Tag entity Marquez une entité en cliquant d'abord sur cette icône, puis sur une entité dans la zone graphique, dans la liste des fonctions ou dans la liste des pièces (dans un Atelier des pièces) ou dans la liste des instances (dans un assemblage).
Markup Lancez l'outil d'annotation.
Browse for attachment Insérez une image qui sera incluse dans le commentaire en tant que pièce jointe.
Document notes View where you can add text, Markdown, and hyperlinks into a Document notes panel.
Refresh notes Reloads document notes.
Edit notes Opens the notes for editing.
Emplacements d'utilisation View where parts or assemblies are used.
Performances View the Tab performance, Tab graphics, Document performance, and System details.
AI Advisor Display AI Advisor, where you can ask questions to get information and references from Onshape's extensive resource library.
Découvrir Onshape View the Explore Onshape panel in an Onshape tutorial.
Gestionnaire de tâches View and filter through your Action items.
Gestionnaire d'onglets Organize and find tabs more easily. See Working with the Tab manager for more information.
Indicateur Définition
Application
Material library
Feature Studio
CAM Studio
PCB Studio
Render Studio
Part Studio
Assemblage
Atelier des variables
Drawing
Dossier
Import / Document upload
Pièce
Composite part
Esquisse
Surface
Flat pattern
Insert entire Part Studio as rigid
Information message
Warning message
Error message
Informations de premier niveau : indique qu'il y a un message d'information dans la sous-section d'une section de niveau supérieur
Avertissement de niveau supérieur : indique qu'il y a un message d'avertissement dans la sous-section d'une section de niveau supérieur
Top level error - Indicates there is an error message within the sub-section of a top-level sectionA
Esquisse
Bouton Nom Action
Extruder Create, add to, subtract from, or intersect parts, surfaces or thin parts by extruding sketch regions, planar faces, lines, or curves.
Pivoter Create, add to, subtract from, or intersect parts, surfaces, or thin parts by revolving sketch regions, planar faces, lines or curves around a central axis.
Ligne Esquissez un segment de ligne ou une série de segments de ligne.
Midpoint line Esquissez une ligne en commençant symétriquement à partir de son milieu.
Rectangle par sommet Sketch a rectangle, starting with a corner point and ending with the diagonal corner point.
Rectangle à partir du centre Sketch a rectangle, starting with its center point and ending with a corner point.
Aligned rectangle Esquisser un rectangle, en commençant par une ligne et en terminant par la distance perpendiculaire au côté aligné.
Cercle à partir du centre Sketch a circle, starting with its center point and ending with a point along its circumference.
Cercle 3 points Sketch a circle by defining 3 points along its circumference.
Ellipse Sketch an ellipse by defining its center point, major axis, and minor axis.
3 point arc Sketch an arc by defining 2 end points and a radius point.
Arc tangent Sketch an arc tangent to a selected line or arc.
Center point arc Sketch an arc by defining its center, start, and end points.
Elliptical arc Sketch an elliptical arc by defining its center point, major axis, minor axis, start and end points.
Conique Sketch an ellipse, parabola, or hyperbola by defining its start, end, and control points. Specify its rho value.
Inscribed polygon Sketch a polygon defined on an inscribed circle.
Circumscribed polygon Sketch a polygon defined on a circumscribed circle.
Spline Sketch a multi-point curve. Drag any point along its length to make adjustments.
Bézier Sketch a multi-point polygon to control a Bezier curve. Drag any point along its control polygon to make adjustments.
Spline control point Add points to a spline or to a Bezier curve control polygon by clicking anywhere along it.
Point Add a point to a sketch.
Texte Add text to a sketch by drawing a bounding box. Specify the font and text style.
Utiliser Project edges or faces of an existing part or sketch onto the active sketch plane.
Intersection Project the intersection of a surface or face and the active sketch plane onto the sketch plane.
Construction Sketch new construction geometry or convert existing sketch entities into construction geometry.
Congé Create fillets or rounds by selecting 2 sketch entities, or a point that connects 2 sketch entities. Specify the radius.
Chanfrein Create distance/distance chamfer by selecting 2 sketch entities or a point that connects 2 sketch entities.
Ajuster Trim a line or curve to the first intersecting point or bounding geometry. If none are found, the entire entity is deleted.
Prolonger Extend a line or curve to the first intersecting point or bounding geometry. If none are found, the line or curve ends at the release point.
Scinder Split sketch curves into multiple segments. For open curves, select 1 or more points. For closed curves, select 2 or more points.
Décalage Create a copy of the selected sketch entity at a specified distance and direction from the original.
Rainure Create a slot around a selected line, spline, arc or closed profile.
Miroir Create a mirrored copy of a sketch entity about a specified line or plane.
Linear pattern Create multiple instances of sketch entities uniformly in 1 or 2 linear directions. Specify number of instances and the distance between instances.
Circular pattern Create multiple instances of sketch entities uniformly about an axis. Specify the angle between instances and number of instances.
Transformer Adjust the location, orientation and scale of a sketch entity using a manipulator.
Insérer DXF ou DWG Insert the contents of a DXF or DWG file into a sketch as sketch entities.
Insert image Insert an image to use as a sketch guide.
Cote Add dimensions to and between sketch entities.
Coïncident Make 2 or more sketch entities share the same location in a sketch.
Concentrique Make any point coincident with the center of an arc or circle. Make selected arcs and circles share a center point.
Parallèle Make 2 or more lines parallel.
Tangente Make a tangent relation between 2 sketch entities, or between a sketch entity and a plane.
Horizontal Constrain 1 or more lines, or a set of points, to be horizontal.
Verticale Constrain 1 or more lines, or a set of points, to be vertical.
Perpendiculaire Make 2 lines perpendicular.
Égalité Faire que des lignes soient de même longueur ou des arcs de même rayon.
Point médian Constrain a sketch point to the midpoint of a line or arc.
Normal Make a curve and line, or a curve and plane, perpendicular.
Point de rencontre Make a sketch entity coincident with another entity outside the active sketch plane.
Symétrique Make 2 entities of the same type symmetric, relative to a line, plane, or linear edge.
Fixer Lock a sketch entity onto the sketch plane so it does not move.
Courbure Create curvature continuous transitions between sketch splines or conics and surrounding geometry.
Flow Create flow continuous transitions (G3) between sketch splines (and conics) and surrounding geometry. Position, tangency, curvature, and the rate of change of curvature all match where the curves join.
Indicateur Définition
Icône d'indicateur d'expression sans variable Indicates an expression without a variable. Located to the left of the dimension value.
Icône d'indicateur d'expression avec variable Indicates an expression with a variable. Located to the left of the dimension value.
Quadrant - Constrains a point to be coincident to an ellipse and its major or minor axis. Created by inference, dragging something to, or placing something on one of the points on an ellipse.
Use - Constrains a sketch entity in one sketch to an entity in another sketch. Created by selecting the Use tool and then an entity (sketch entity, face, or edge) in a different sketch or feature.
Intersection - Constrains geometry created with the Intersection tool to the intersected face. Open curves use Pierce constraints at the end points, and closed curves use Intersection constraints.
Part Studio
Bouton Nom Action
Extruder Create, add to, subtract from, or intersect parts, surfaces or thin parts by extruding sketch regions, planar faces, lines, or curves.
Pivoter Create, add to, subtract from, or intersect parts, surfaces, or thin parts by revolving sketch regions, planar faces, lines or curves around a central axis.
Balayer Create, add to, subtract from, or intersect parts, surfaces or thin parts by sweeping sketch regions, planar faces, lines or curves along a path. Add optional profile control, twist, and scale.
Lisser Create, add to, subtract from, or intersect parts, surfaces, or thin parts by placing a smooth face between ordered profiles.
Épaissir Create, add to, subtract from, or intersect parts by thickening surfaces or faces of solids.
Entourer Create, add to, subtract from, or intersect parts by selecting faces, surfaces and parts that enclose a region.
Congé Create constant, variable, partial, or asymmetric edge fillets, or create full round fillets. Specify measurement type (radius or width) and control type (distance, conic, or curvature).
Face blend Blend 2 or more faces. Specify propagation, cross section type, measurement type, symmetry, control type, and trim type.
Chanfrein Create beveled edges or faces. Specify measurement type (offset or tangent) and chamfer type (equal, two distances or distance/angle).
Dépouille Add a draft angle to one or more faces by selecting a neutral plane or parting line.
Body draft Apply draft to a part by selecting edges, faces, or the part itself.
Nervure Create ribs from sketch curves on selected parts. Specify thickness and indicate whether to extend normal or parallel to the sketch plane.
Coque Create a thin-walled part by removing one or more faces. Specify the wall thickness for the remaining faces.
Perçage Create simple, countersink, or counterbore holes in parts by selecting sketch points or mate connectors. Specify size, termination type, and standard, as well as precision and tolerances.
External thread Add an external thread to cylindrical parts by selecting a leading edge or edges. Specify the standard, size, pitch, length, end type, and optionally add a chamfer or undercut.
Linear pattern Create, add to, subtract from, or intersect multiple instances of parts, faces, or features. Specify the direction, distance, and number of instances, or specify instances to skip.
Circular pattern Create, add to, subtract from, or intersect multiple instances of parts, faces, or features. Specify the axis, angle, and number of instances, or specify instances to skip.
Curve pattern Create, add to, subtract from, or intersect multiple instances of parts, faces, or features. Specify the path, spacing type, and number of instances, or specify instances to skip.
Miroir Create, add to, subtract from, or intersect a mirror copy of parts, faces, or features. Mirror about a plane or planar face.
Booléen Perform a union, subtraction, or intersection on two or more parts or surfaces.
Scinder Select entities to split. For parts and surfaces, specify whether to keep or remove the split tool. For faces, select a sketch curve, curve, surface, or plane to use as the split tool.
Transformer Move, rotate, copy, or scale a part. Transform by mate connectors or translate by line, distance, or XYZ.
Emballage Wrap faces or sketch entities around a cylindrical or conical part or surface. Adjust the position by specifying anchor points, angle, or shift.
Décalcomanie Apply an image onto an existing flat or cylindrical face of a part or surface. Specify the exact location, size and alignment of the applied image.
Delete part Delete one or more parts or surfaces. For composite parts, specify whether to delete, dissolve, or ignore.
Modify fillet Remove existing fillets and rounds, or change their radius. Useful for imported parts.
Delete face Remove one or more faces from a part. Specify whether to heal the surrounding faces, cap the void, or leave the void open. Useful for imported parts.
Move face Translate, rotate, or offset selected faces. Specify end type and distance, or axis and rotation angle. Useful for imported parts.
Replace face Trim a face or extend a face to a new surface. Select faces to replace and the surface to use for the replacement. Useful for imported parts.
Plan Create a new construction plane by referencing existing geometry.
Offset surface Create a new surface by offsetting an existing face, surface, or sketch region. To create a copy, set the offset distance to 0.
Boundary surface Create or add a surface specified by its boundary profiles.
Remplir Create or add to a surface by selecting a set of curves or edges to form a closed boundary. Specify the continuity condition for each selection.
Move boundary Extend or trim the boundary edges of a surface.
Ruled surface Create or add a ruled surface from an existing edge, sketch line, or curve. Specify the ruled surface type, angle, distance, and corner type.
Mutual trim Trim two adjacent selected surfaces by extending intersections to complete the trim. Specify if generated surfaces should be merged into a single surface.
Constrained surface Create a surface from a selection of points or mesh data within a specified tolerance. Optimization controls for performance or smoothness and deviation display controls.
Hélice Create a helix using a conical or cylindrical face, helix axis, or circular edge. Specify helix type, start and end conditions, number of revolutions, and helical pitch.
3D fit spline Create a curve through a series of vertices or tangentially continuous edges. Specify direction, magnitude, and curvature conditions for the spline's start and end points.
Projected curve Create a curve at the projection of an existing curve onto faces or 2 projected sketches by selecting 2 non-parallel sketches.
Bridging curve Create a curve connecting any 2 points or vertices. Specify the continuity condition for each selection.
Composite curve Create a single curve from multiple sketch entities, adjacent edges, and other curves. Each selection must meet at their vertices.
Intersection curve Create a curve at the intersection of 2 or more surfaces or faces. The selections must intersect.
Trim curve Trim or extend existing curves by a distance or to a bounding entity.
Isocline Given input faces, angle and reference direction, creates isocline curves or split lines along isoclines.
Offset curve Créez et prolongez et/ou scindez une nouvelle courbe en décalant les arêtes des faces environnantes.
Isoparametric curve Create U or V curves on an existing surface. Specify a number of evenly spaced curves or create a set of curves using a location value or selected point.
Edit curve Edit an existing curve or create a new curve by selecting sketch entities, edges, and/or curves to apply a simplified approximation, adjust degree, reposition control curve vertices, and/or planarize.
Routing curve Create an interpolated spline or polyline with optional radii through points defined by dragging a manipulator, selecting mate connectors or vertices, sampling edges, or by importing a CSV file.
Mate connector Create a mate connector on or between parts or surfaces. Mate connectors are used to locate and orient entities within an assembly mate.
Dérivé Using an associative link, insert parts, sketches, surfaces, curves, planes, or mate connectors from one Part Studio into another. Changes made to the parent entity are reflected in the derived entity.
Variable Create a variable in this Part Studio for use in dimensions and expressions. In any numeric field, use # and the variable name.
Query variable Create a query variable in this Part Studio for use in other features.
Composite part Create a composite part from selected entities (parts, surfaces, curves, points, and meshes). Specify whether the composite part is open or closed.
Identification Tag entities for use in Frames, Sheet metal forms, or PCB Studio holes. Select geometry, define orientation, add properties.
Cadre Create a frame by selecting the sweep profile and paths from faces, edges, or vertices, then adjust using mirror, offset, and angle controls. Specify joint overrides, and trim or extend segments using faces, planes, or bodies.
Frame trim Trim frame segments by grouping them so earlier groups are subtracted from subsequent groups.Trim segments against faces by selecting segments and a face to use as split tool.
Gousset Create gussets between adjacent frame segments by selecting edges, where the edge centerpoint is the gusset centerpoint. Specify the profile, size, thickness, and offset from center and a chamfer size for the outer corner of rectangular gussets.
Embout Create one or more endcaps for frame segments by selecting frame segment end faces to be capped, and endcap profile type. Specify the endcap thickness adjust the offset to make the endcap profile larger or smaller than the frame segment profile.
Cut list Create an open composite part from selected segments with a table listing each segment's properties. Select all frames or each segment individually and override any segment's characteristic properties.
Sheet metal model Create sheet metal parts by converting existing parts, extruding sketches, or thickening faces or sketches. Operations on sheet metal models are automatically represented as a flat pattern with joints and bends listed in a table.
Flange Create a wall connected by a bend for each selected edge of an existing sheet metal part. Specify flange alignment, end type, and angle control type.
Hem Create hems on existing sheet metal parts. Specify hem type, base alignment, and corner type.
Tab Add a tab to a sheet metal flange, remove interfering material, or bridge 2 flanges from the same sheet metal model.
Bouton de pliage en tôle Bend Pliez un modèle de tôle le long d'une ligne de référence, avec des options de contrôle de pliage supplémentaires.
Forme Create form features on existing sheet metal parts. Form tools are selected from a predefined library.
Sheet metal loft Create a frame by selecting the sweep profile and paths from faces, edges, or vertices, then adjust the profile using mirror, offset, and angle controls. Specify joint overrides and trim or extend segments using faces, planes, and bodies.
Make joint Create a bend or rip joint on adjacent walls. Specify bend radius or rip style.
Corner Modify an individual sheet metal corner by selecting an edge, vertex, or face of the existing corner. Specify corner relief type and scale.
Bend relief Modify an individual sheet metal bend relief. Specify bend relief type and scale.
Corner break Break the corner on sheet metal parts by applying a fillet or chamfer. Select a corner edge or vertex and specify corner break type and size. Recommended use after finalizing all flanges and joints.
Finish sheet metal model Deactivate the sheet metal models to edit with non-sheet metal features. These features are not represented in the sheet metal table or flat pattern.
Flex PCB model Créer des pièces de circuits imprimés (PCB) flexibles en convertissant des pièces existantes, en extrudant des esquisses ou en épaississant des faces ou des esquisses. Les opérations sur les modèles PCB sont automatiquement représentées sous la forme d'une mise à plat, et les jointures et les plis sont répertoriés dans un tableau.
Finish flex PCB model Deactivate and optionally unfold the PCB model to continue editing with non-PCB features.

Side panel

Bouton Nom Action
Volet Apparence Opens the Appearance panel.
Configuration panel Opens the Configuration panel.
Tableaux personnalisés Opens the Custom tables.
Table d'inspection Opens the Inspection table.
Sheet metal table and flat view Opens the Sheet metal table and flat view.
Tableau des variables Opens the Variable table.

Feature list

Indicator Definition
Indicates the feature has missing or broken selections.
Indicates the sketch is not fully defined.
Indicates one or more features failed to regenerate. Click to filter the Feature list to only those features.
Indicates a collapsed folder contains a feature with a warning or an error.
Indicates the feature is dynamically suppressed by an expression.
Indicates the feature has one or more comments attached.
Indicates a reference to a version of a tab in the current document, and that the reference is up to date.
Indicates a reference to a version of a tab in the current document, and that a newer version is available.
Indicates a reference to a revision, and that the reference is up to date.
Indicates a reference to a revision, and that a newer revision is available.
Indicates a derived or linked reference is out of sync with its source.
Indicates the feature uses a linked in-context reference.
Indicates the feature uses an active in-context reference.
Indicates the feature has broken in-context references.
Indicates the feature or sketch is shown. Click to hide it.
Indicates the feature or sketch is hidden. Click to show it.

Parts list

Indicator Definition
Indicates the part contains ignored faults.
Indicates the part has one or more comments attached.
Indicates the part is released at the latest revision.
Indicates the part's revision is obsolete.
Indicates the part's revision was automatically made obsolete by a newer release.
Indicates the part is shown. Click to hide it.
Indicates the part is hidden. Click to show it.
Assemblage
Bouton Nom Action
Insert Insert parts, assemblies, sketches, or surfaces into an Assembly. Insert from the same document, other documents, or standard content.
Mate connector Create a mate connector on or between parts, surfaces, or sketches. Mate connectors are used to locate and orient entities within an assembly mate.
Fastened mate Remove all degrees of freedom between 2 entities.
Revolute mate Allow rotation about the Z axis. The 1st selection serves as the rotational point, and the 2nd as the stationary point.
Slider mate Allow translation along the Z axis. The 1st selection serves as the sliding point, and the 2nd as the stationary point.
Planar mate Allow translation along the X and Y axes, and rotation about the Z axis. The 1st selection serves as the movement point, and the 2nd as the stationary point.
Liaison pivot-glissant Allow translation and rotation about the Z axis. The 1st selection serves as the translational and rotational point, and the 2nd as the stationary point.
Pin slot mate Allow rotation about the Z axis and translation along the X axis. The 1st selection serves as the pin and the rotational movement point, and the 2nd selection serves as the translational movement.
Ball mate Allow rotation about the X, Y, and Z axes. The 1st selection serves as the rotational movement point, and the 2nd selection serves as the stationary point.
Parallel mate Allow 2 entities to rotate parallel to each other and translate freely.
Tangent mate Mate 2 entities tangentially, based on the selected faces, edges, or vertices.
Width mate Allow translation and normal rotation on a slot's center plane. The 1st selection defines the item, and the 2nd selection defines the center plane.
Groupe Lock the position of selected entities relative to one another.
Mode accrochage Drag an entity to snap to a Mate connector on another entity. Specify the mate type and orientation.
Show mates mode Hover over or select an instance to show its mates.
Répliquer Using a seed instance as input, locate geometry identical to that which the seed is mated and replicate the seed on matching geometry.
Replace instance Replace instances with a selected part, surface, sketch, or subassembly.
Assembly linear pattern Create multiple instances of a part, surface, sketch, or subassembly. Specify up to 3 directions, distances, and number of instances.
Assembly circular pattern Create multiple instances of a part, surface, sketch, or subassembly. Specify the axis, angle, and number of instances.
Assembly mirror Create mirrored instances of a part, surface or subassembly. Specify the mirror plane and select instances to mirror.
Gear relation Create a constant ratio of angular rotation between 2 mates with rotational degrees of freedom.
Rack and pinion relation Relate a mate with a rotational degree of freedom to a mate with a linear degree of freedom.
Screw relation Relate the rotational and translational degrees of freedom of a Cylindrical Mate.
Linear relation Create a constant ratio of motion between 2 mates with linear degrees of freedom.
Display states Assign a name to a specific display state of an assembly. Specify which parts, subassemblies, and mates are hidden or in view.
Create Part Studio in context Create a new Part Studio in the context of this assembly. The assembly appears as context graphics that can be used for reference.

Force

Open a dialog to simulate the effect of an evenly distributed linear force on the entire instance, or on a set of faces on the instance.
Moment Open a dialog to simulate the effect of an evenly distributed moment (torque) on the entire instance, or on a set of faces on the instance.
Palier Open a dialog to simulate the effect of a bearing load on one or more faces of an instance.
Pression Open a dialog to simulate the effect of an evenly distributed pressure on one or more faces of an instance.
Accélération Open a dialog to simulate the effect of a static, uniform, linear acceleration acting on an instance.
Vitesse angulaire Open a dialog to simulate the effect of an angular velocity and the resultant load acting on an instance.

Side panel

Bouton Nom Action
Table de nomenclatures Opens the Bill of Materials table.
Configuration panel Opens the Configuration panel.
Les vues éclatées Opens the Exploded views panel.
Named positions Opens the Named positions panel.
Simulation Opens the Simulation panel.
Tableau des variables Opens the Variable table.

Liste des instances

Indicateur Définition
Indique un assemblage ou un sous-assemblage.
Indique une instance.
Indique que l'instance est importée (dérivée).
Indique une instance configurée.
Indicates a configured Assembly or subassembly.
Indique que l'assemblage est fixé à l'origine.
Indicateur de limite de contrainte. Indique que la contrainte correspondant a une ou plusieurs limites appliquées.
Indique que l'instance correspondante est ancrée en place.
Indique que le sous-assemblage possède une instance fixe.
Icône des degrés de liberté Indique que l'instance n'est pas fixe et possède des degrés de liberté.
Indique que toutes les instances de l'assemblage ou du sous-assemblage sont fixes (totalement rigides).
Indique que toutes les instances de l'assemblage ou du sous-assemblage configuré sont fixes (entièrement rigides).
Indicates a subassembly is either locked to the current top level assembly position or follows the subassembly's named position (if one exists). See Lock current subassembly position or follow to a subassembly's named position for more information.
Indicates released item (in the release management workflow).
Indique une instance principale dans un état contextuel.
Indique une instance principale dans un état contextuel actif (s'il existe plusieurs états contextuels).
Indique une instance principale précédente (si elle est présente) dans un état contextuel.
Afficher/masquer l'élément de la liste des instances correspondant.
Indique que la facétisation est activée pour l'assemblage ou le sous-assemblage.
icône d'exclusion dynamique Indique que l'instance a été exclue dynamiquement à l'aide d'une expression.
Indique une erreur d'assemblage.

Linked references

Indicateur Définition
Activates when updates are available for top-level referenced instances, unpinned child levels, or revisioned top-level unpinned instances. Located in the Assembly toolbar.
Instance is linked to the latest version on a branch from the same document or another document. Document type is seen in the tooltip and in the Reference manager. Located next to the instance name in the Instances list.
L'instance référencée a une version plus récente disponible sur sa branche. Située à côté du nom de l'instance dans la liste des instances.
L'instance est révisée et fait référence à la dernière révision. Située à côté du nom de l'instance dans la liste des instances.
Une version plus récente est disponible pour l'instance.
The instance is linked to the latest version on its branch and is pinned. Located next to the instance name in the Instances list.
The instance is revisioned to the latest revision and is pinned. Located next to the instance name in the Instances list.
L'instance liée a une version plus récente disponible sur sa branche et est épinglée. Située à côté du nom de l'instance dans la liste des instances.
L'instance révisée a une révision plus récente disponible et est épinglée. Située à côté du nom de l'instance dans la liste des instances.
The instance references a workspace in the same document and has a referenced or revisioned child with a newer version available. Located next to the subassembly name in the Instances list.
The instance references a workspace in the same document with a referenced or revisioned child that has a newer version or revision available, but the child is pinned. Located next to the subassembly name in the Instances list.
Le sous-assemblage référencé contient une version liée ou révisée avec une version ou une révision plus récente disponible. Située à côté du nom du sous-assemblage dans la liste des instances.
Le sous-assemblage référencé contient un enfant épinglé référencé ou revu avec une version ou une révision plus récente disponible. Située sur le nom du sous-assemblage lié dans la liste des instances.
Le sous-assemblage révisé a un enfant référencé ou révisé avec une version ou une version plus récente disponible. Ils ne peuvent pas être mis à jour à partir de l'assemblage de niveau supérieur. Située sur le nom du sous-assemblage révisé dans la liste des instances.
Le sous-assemblage épinglé et référencé contient une version référencée ou révisée avec une version ou une révision plus récente disponible. Située sur le nom du sous-assemblage épinglé et référencée dans la liste des instances.
Le sous-assemblage épinglé et révisé contient un enfant référencé ou révisé avec une version ou une révision plus récente disponible. Située sur le nom du sous-assemblage épinglé et révisé dans la liste des instances.
Une version d'une instance de niveau supérieur dispose d'une nouvelle version ou révision disponible. Située sur une version référencée d'un sous-assemblage dans la liste des instances.
Une nouvelle révision est disponible pour un enfant d'une instance de niveau supérieur. Située sur un enfant pour lequel il existe une révision d'un sous-assemblage dans la liste des instances.
Une version de la version et de l'historique qui a été créée automatiquement par Onshape, par exemple, lors de l'utilisation de l'option Mettre à jour vers la dernière version, comme expliqué plus loin dans cette rubrique.
Icône automatique obsolète La pièce est automatiquement obsolète en raison d'une version ou d'une révision plus récente du même numéro de pièce.

Contraintes

Indicateur Définition
Fastened - mate two entities and remove all degrees of freedom between them.
Revolute - mate two entities allowing rotational movement about the Z axis. (Rz).
Slider indicator good Slider - mate two entities allowing translational movement along the Z axis. (Tz).
Planar - mate two entities allowing translational movement along the X axis and the Y axis, and rotational movement about the Z axis (Ty, Tx, Rz).
Cylindrical - mate two entities allowing translational movement along the Z axis and rotational movement about the Z axis (Tz, Rz).
Pin slot - mate two entities allowing rotational movement about the Z axis and translational movement along the X axis. (Rz, Tx).
Ball - mate two entities allowing rotational movement about the X, Y and Z axis (Rx, Ry, Rz).
Parallel - mate two entities allowing individual translational movement along any axis, and parallel rotation along any axis.
Tangent - mate two entities tangent to the selected faces, edges, or vertices.
Width - mate up to two tabs symmetrically between two mate connectors. The first selection defines the item to be centered, and the second selection defines the center plane.
Group - fix the position of selected instances relative to one another within the assembly, preserving relative positioning without requiring Mates.
Indicates linear direction along the X axis.
Indicates linear direction along the Y axis.
Indicates linear direction along the Z axis.
Indicates a minimum linear limit along the X axis.
Indicates a minimum linear limit along the Y axis.
Indicates a minimum linear limit along the Z axis.
Indicates a maximum linear limit along the X axis.
Indicates a maximum linear limit along the Y axis.
Indicates a maximum linear limit along the Z axis.
Indicates rotation about the X axis.
Indicates rotation about the Y axis.
Indicates rotation about the Z axis.
Indicates a minimum rotation limit about the X axis.
Indicates a minimum rotation limit about the y axis.
Indicates a minimum rotation limit about the Z axis.
Indicates a maximum rotation limit about the X axis.
Indicates a maximum rotation limit about the Y axis.
Indicates a maximum rotation limit about the Z axis.
Drawing
Bouton Nom Action
Insérer une vue Place a view from a Part Studio or Assembly by selecting a reference, then choose a part from an existing selection, a view from the selected reference, and a view scale. Click to place the view on the sheet.
Vue projetée Place a Projected view of an existing view by selecting an existing view and dragging to place. Projected view respects the current drawing standards, that is, ANSI uses 3rd angle projection and ISO uses first angle projection.
Vue auxiliaire Create a view normal, in line, or aligned to an axis with a selected edge. Select a linear edge, isometric circle fillet edge, centerline or sketch line and drag to place the view.
Vue en coupe Create a horizontal, vertical, or angular section view of an existing view by choosing a view type and defining the cutting line with points. Generate a preview and click to place.
Vue en coupe alignée Create an aligned section view of an existing view by selecting a cutting line center point, a point to locate the viewing plane portion, and a point to locate the revolved plane portion. Generate a preview and click to place.
Broken-out section Modify an existing view by cutting away a closed profile to a defined depth.
Vue détaillée Create a Detail view of a particular region of an existing view by choosing a profile shape, creating the profile within the boundaries of the desired view and clicking to place.
Vue réduite Shorten an existing view by trimming out a portion with a regular break.
Vue recadrée Modify an existing view by cropping a closed profile.
Cote Place a dimension on any type of curve. Select two points, edges, or arcs and circles and drag the cursor and click to place the dimension.
Cote du chanfrein Place a note or dimensions on a chamfered edge by selecting a chamfered edge and a reference edge, then click to place.
Cote maximale ou minimale Place a minimum or maximum dimension to any combination of arcs/circles and any other geometry, excluding curves, by selecting the geometry and clicking to place the dimension.
Cote linéaire à 2 points Place a dimension between any two points in a view. Select two points and drag to cause the dimension type to toggle between horizontal, vertical and aligned.
Point to line dimension Place a dimension between a point and a line in a view. Select a point, then a line and drag to cause the dimension type to toggle between horizontal and vertical.
Line to line dimension Place a dimension between a line and a line in a view. Select two parallel lines and the dimension will be perpendicular to the selected lines.
Line to line angular dimension Place an angular dimension between two non-parallel lines. Select two non-parallel lines and drag to place the dimension.
Cote angulaire à 3 points Place an angular dimension between three points by selecting a point as the angle vertex and the next two points, then drag to place the dimension.
Cote de la longueur de l'arc Place an arc length dimension on an arc. Select an arc and drag to place the dimension.
Cote du rayon Place a radius dimension on an arc or a circle. Select an arc or circle and drag to place the dimension.
Diameter dimension Place a diameter dimension on an arc or a circle. Select an arc or circle and drag to place the dimension.
Cote raccourcie Place a foreshorten dimension on a silhouette edge, or on a centerline and an arc or circle edge, to create a half-diameter dimension.
Cote de l'ordonnée Place an ordinate dimension group on a drawing view by selecting the origin point, dragging and clicking to position the origin dimension text, and selecting additional points. Press Enter to end placing dimensions.
Légende de perçage/filetage Place a dimensional callout label on a hole/thread by selecting a circle which is part of a hole/thread feature and dragging to place the callout.
Datum Place a datum reference attached to an entity by selecting datum or datum target and an entity to attach the datum to, then clicking to place the datum.
Tolérance géométrique Place a geometric tolerance feature control frame by describing the tolerance control frames in the dialog and selecting a point on a view edge to start a leader and/or a position away from edges to place the tolerance.
Symbole de finition de la surface Place a surface finish symbol by describing the surface finish and selecting a linear edge, a point on a non-linear edge or directly on the sheet. Click to place the symbol.
Symbole de soudure Place a weld symbol by describing the weld symbol in the dialog, selecting an entity to associate the symbol and clicking to place the symbol.
Edge condition symbol Place an edge condition symbol by setting the values in the dialog, clicking a vertex or edge in a view to place the arrow, then clicking again to place the symbol.
Note Place a note with or without a leader by selecting an empty area to place a note without a leader, or an edge or other geometry to anchor the leader. Use the menu to set text properties and click the check to save the note.
Légende Place callout in space or attached to geometry by selecting geometry or a point in space and click to locate the callout.
Tableau Place a table of cells with notes by specifying the number of rows and columns in the table dialog and optional title and header rows, then enter and style text in the active cell note. Select a fixed corner and place the table.
BOM table Place a Bill of Materials table from an Assembly or from a BOM app tab (e.g. Onshape App Store app) or from a BOM data tab (e.g. Onshape BOM for Google Sheets).
Cut list table Place a cut list table of a composite part by selecting a cut list, choosing the display order, and selecting a fixed corner. Click to place cut list on drawing sheet.
Hole table Insert a hole table by selecting views for the table to apply to and optionally defining the origin location within a view. Click to place the hole table on the drawing sheet.
Custom table Place a custom table by selecting a Part Studio, choosing a table and display order, and defining a fixed corner. Click to place custom table, then choose an end condition and define the depth.
Axe de symétrie à 2 points Create a centerline between two points by selecting two points to place the centerline.
Edge to edge centerline Place a centerline by selecting two edges.
3 point circle centerline Create a circular centerline for a bolt circle diameter by selecting the center of three circle or arc edges.
2 point circle centerline Create a circular centerline using two points by selecting a point for the center and a point for the circumference.
Marque de centre Place a centermark or pattern of centermarks at the center of an arc or circle by selecting arcs or circles for individual or patterns of centermarks.
Intersection virtuelle Create a virtual sharp associated with two linear edges by selecting two linear edges to place the virtual sharp.
Ligne Create a line by clicking two points or a chain of points. Double-click to specify end point. Press Escape to end.
Cercle à partir du centre Create a circle by clicking to specify the center point and the radius of the circle.
Cercle 3 points Create a circle by clicking to specify the first anchor point, the second anchor point and the radius of the circle.
Arc tangent Sketch an arc tangent to a selected line or arc.
Rectangle par sommet Create a rectangle by clicking to specify one corner of the rectangle and the diagonal corner point.
Rectangle à partir du centre Create a rectangle by clicking the center point and corner point.
Spline Create a spline through multiple points by selecting the start point and additional points for the spline to fit to. Double-click to end the spline.
Point de spline Add points along a spline by selecting the Spline point tool and clicking along the spline to set additional points.
Point d'esquisse Create sketch point by selecting the Sketch point tool and clicking to specify the sketch point position.
Zone de hachures Add hatch regions to enclosed areas by sketching or selecting a closed profile, choosing a hatch pattern, and adjusting the scale, angle and color of the hatch pattern.
Ajuster Trim a line or curve to the first intersecting point or bounding geometry. If no intersection or bounding geometry is found, the entire entity is deleted.
Horizontal Constrain 1 or more lines, or a set of points, to be horizontal.
Verticale Constrain 1 or more lines, or a set of points, to be vertical.
Coïncident Make 2 or more sketch entities share the same location in a sketch.
Perpendiculaire Make 2 lines perpendicular.
Tangente Make a tangent relation between line or curve entities.
Parallèle Make 2 or more line parallel.
Insérer DXF ou DWG Insert the contents of a DXF or DWG file as Onshape drawing entities.1. Import the DXF or DWG file into a document.2. Select the Insert DXF or DWG icon.3. In the dialog, select the file to import into the drawing.
Insert image Place an image in a drawing by selecting an image from current workspace or browse documents for other images, then clicking and dragging to set image size and position.
Format painter Select an annotation to copy the style, tolerance/precision, content, and then annotations to apply that style, tolerance/precision, content to.
Élément d'inspection Inspection items can be created automatically or manually.1. To create them manually, hover over an annotation to preview the inspection item, then click to confirm its placement.
Hide inspection items Click to hide inspection items on the drawing.

Side panels

Bouton Nom Action
Feuilles Opens the left side sheets panel.
Icône du tableau d'inspection Table d'inspection Opens the right side Inspection table
Styles Opens the right side Styles panel.
Icône de fonction Propriétés Propriétés du dessin Opens the right side panel with Drawing properties tabs.
MBD status Opens the MBD status panel.
Icône de l'outil Mesurer Measure Located at bottom right, this opens the Measure tool dialog.
Indicateur Définition
icône de point d'accroche (sélectionnée) Filled circular grip point, used to resize/move an entity.
Icône de rotation du point d'accroche (sélectionnée) Hollow circular grip point. Rotate: Drag these to rotate
Icône du point d'accroche d'inversement de l'orientation (sélectionnée) Filled diamond grip point. Flip: Click these to flip the orientation
Icône du point d'accroche d'attache du point (sélectionnée) Point attachment: Drag these to reattach to another point.
Icône du point d'accroche de fixation des arêtes (sélectionnée) Edge attachment: Drag these to reattach to another edge.

Symboles

Indicateur Définition
° Degré
⌀ Diamètre
℄ Axe de symétrie
⌵ Countersink
↧ Profondeur
⌴ Fraisage
□ Carré
⌒ Longueur de l'arc
± Plus/Moins
Ⓤ Profil inégalement disposé
Ⓘ Indépendance
Icône de fonction continue Fonction continue
Icône Lamage Lamage
▷ Translation

Geometric tolerance symbols

Indicateur Définition
Characteristic: Position (location)
Characteristic: Concentricity or coaxiality (location)
Characteristic: Symmetry (location)
Characteristic: Parallelism (orientation)
Symbole de perpendicularité Characteristic: Perpendicularity (orientation)
Symbole d'angularité Characteristic: Angularity (orientation)
Symbole de cylindricité Characteristic: Cylindricity (form)
Symbole de planitude Characteristic: Flatness (form)
Symbole de circularité ou d'arrondi Characteristic: Circularity or roundness (form)
Symbole de rectitude Characteristic: Straightness (form)
Symbole carré Characteristic: Square (form)
Profil d'un symbole de surface Characteristic: Profile of a surface
Profil d'un symbole de ligne Characteristic: Profile of a line
Symbole de battement circulaire Characteristic: Circular runout
Symbole de battement total Characteristic: Total runout
Ligne d'attache
Leader: All around
Leader: All over leader
Diamètre
Diamètre sphérique
Rayon
Rayon sphérique
Rayon contrôlé
Modifier: At maximum material condition, a feature contains the maximum amount of material stated in the limits (Type: MMC)
Modifier: At least material condition, a feature contains the minimum amount of material stated in the limits (Type: LMC)
Modifier: Regardless of feature size, indicates that the feature can be any size within the state limits (Type: RFS)
Modifier: Free state (Type: F)
Modifier: Tangent plane (Type: T)
Modifier: Unequally disposed profile/Unilateral tolerance. Specifies the amount of material out of the total tolerance that is added to the part.
Modifier: Projected tolerance zone
Icône Tolérance statistique Modifier: Statistical tolerance. Indicates tolerances to related assembly components based on sound statistics.
Icône de fonction continue Modifier: Continuous feature. Indicates when two or more interrupted features should be treated as a single feature
Icône Lamage Modifier: Spot face. Indicates the surface to be spot faced.
Icône de translation Modifier: Translation. Indicates that a datum feature simulator is not fixed at its basic location and shall be free to translate.
PCB Studio
Bouton Nom Action
Importer des fichiers ECAD Import ECAD files into this PCB Studio.
Exporter au format IDF Exportez ce PCB Studio au format IDF.
Importer la carte Import board from cloud service (Altium 365).
Envoyer la carte Push board to cloud service (Altium 365).
Transférer la carte Pull board from cloud service (Altium 365).
Synchroniser depuis Onshape Synchronisez un Part Studio ou un Assemblage avec ce PCB Studio pour créer une carte ou mettre à jour les contours, l'emplacement des composants, les zones d'exclusion ou de maintien et les autres fonctions ECAD d'une carte. (importation).
Synchroniser avec Onshape Synchronisez ce PCB Studio avec Onshape en créant des Part Studios ou des Assemblages à partir de données ECAD. (exportation).
Mettre à jour la bibliothèque vers la dernière version Mettez à jour le document de bibliothèque de ce PCB Studio avec la dernière version lorsqu'il a été modifié depuis un autre PCB Studio.
Rechercher Recherchez dans la vue actuelle des composants ou des zones d'exclusion ou de maintien dans l'aperçu 3D. Recherchez des mappages de composants dans la vue de mappage.
Effacer la recherche Effacer la recherche.
Réglages Définissez les préférences utilisateur, notamment la bibliothèque de mappage des composants par défaut et le dossier Composants pour les nouveaux documents Onshape.
Aide Opens the PCB Studio help documentation in another tab.
Cartes et bibliothèques Display all boards and libraries in the current PCB Studio
Tous les mappages de composants Display all components stored in PCB Studio.
Indicateur Nom Définition
Carte liée Indicates a board is linked.
Mappings Board mappings.
Aucune empreinte Nothing will be created in Onshape for this component mapping because the ECAD file contains no shape data, or the component has been excluded by the user.
Empreinte The component is represented in Onshape by a model automatically created from the simple shape data in the ECAD file, but the Onshape model hasn't been created yet.
Empreinte liée The component is represented in Onshape by a model automatically created from the simple shape data in the ECAD file. The Onshape model has been created and linked.
Composant The component is represented in Onshape by a user-selected custom Onshape Part Studio, but the document is currently unavailable. The document may have been moved to the trash or had its permissions changed.
Composant lié Le composant est représenté dans Onshape par une pièce Onshape personnalisée sélectionnée par un utilisateur.
Erreur de composant Une erreur s'est produite lors de la création du modèle Onshape de ce composant.
Carte rigide Indique une zone rigide sur le circuit imprimé.
Carte flexible Indique une zone flexible sur le circuit imprimé.
Contour de la carte Indique le schéma de la carte.
PCB Outline Indicates a user-defined outline in the ECAD system on the board, and can be used to indicate where a label is to be placed by the MCAD user. Not the same as the PCB board outline.
Zone de maintien Une zone de maintien (zone où les éléments doivent être placés).
Zone d'exclusion Une zone d'exclusion (zone où les éléments ne doivent pas être placés).
Perçage Un perçage dans le circuit imprimé.
Perçage plaqué An electrical hole in the PCB board.
Perçage non plaqué A Mechanical hole in the PCB board.
Couches Layers in the PCB board.
Empilement Indique un empilement de couches (l'empilement de couches dans le plan z qui constitue cette carte ou cette zone de carte).
Diélectrique Indique une couche diélectrique (isolante) sur le circuit imprimé.
Copper Indicates a copper (conductive) board layer.
PCB Data Indicates tagged PCB holes metadata. Data is marked as either [Holes, Plated] [Tag] or [Holes, Non-Plated] [Tag].
Feature Studio
Bouton Nom Action
New feature Creates a new custom FeatureScript feature.
Feature parameters Insert feature parameter definitions.
Query functions Insert query function definitions.
Evaluate functions Insert evaluate function definitions.
Fonctions mathématiques Insert mathematical function definitions.
Sketch functions Insert sketch function definitions.
Operation functions Insert operation function definitions.
Importer Add import statements to this Feature Studio to reference other Feature Studios, Part Studios, or files.
Format Studio Adjust the whitespace of this Feature Studio to match a common style.
Co-complete Enable Onshape Labs in your preferences to use co-complete. Co-complete uses AI to contextually suggest and complete code as you type.
Monitor View runtime notices from this Part Studio in this document's Feature Studios. The Part Studio automatically regenerates when needed and displays errors for typed values that fail their typechecks.
Profil View timing data for individual FeatureScript execution steps in the document's Feature Studios. The Part Studio automatically regenerates when needed.
Module outline Shows all top level symbols in the dropdown. Use the search field to filter symbols by name. Click on a symbol to navigate to it in the editor.
Back reference Go to the previous reference.
Forward reference Go to the next reference.
Indicator Definition
Editor gutter - Indicates a FeatureScript error on that line; a parse, semantic, modeling, or runtime error.
Editor gutter - Indicates a FeatureScript warning on that line.
Editor gutter - Indicates an informational FeatureScript notice on that line.
A faded gutter icon indicates the error is out of date; the code has been edited since it was last analyzed.
A faded gutter icon indicates the warning is out of date; the code has been edited since it was last analyzed.
A faded gutter icon indicates the information notice is out of date; the code has been edited since it was last analyzed.
FeatureScript notices - Indicates there are no errors or warnings in the document.
FeatureScript notices - Indicates there is at least one warning, and no errors.
FeatureScript notices - Indicates there is at least one error.
Import label - The import references a tab in the current document, or another document, at the latest version.
Import label - The import references a tab in the current document, or another document, and a newer version is available.
Indicates the version whose FeatureScript has been published.
CAM Studio
Bouton Nom Action
Insert Insérer la pièce, le dispositif de serrage et le stock
Créer une tâche Creates a new machining job.
Créer une machine Creates a new machine definition.
Créer une configuration Creates a new machining setup.
Créer un outil Creates a new machining tool definition.
Créer une trajectoire d'outil Creates a new machining toolpath.
Créer un plan de travail Creates a new machining work plane.

Right panel

Bouton Nom Action
Tout afficher Centrez les modèles visibles dans la zone graphique.
Isométrique Visualisez les modèles de manière isométrique dans la zone graphique.
Devant Vue frontale standard des modèles dans la zone graphique.
Back Vue arrière standard des modèles dans la zone graphique.
Haut Vue de dessus standard des modèles dans la zone graphique.
Bas Vue de dessous standard des modèles dans la zone graphique.
Gauche Vue standard orientée vers la gauche des modèles dans la zone graphique.
Droite Vue standard orientée vers la droite des modèles dans la zone graphique.
Activer/désactiver la transparence Rendez les composants ou les modèles de la zone graphique transparents.
Indicator Definition
CAM job
CAM stock
Workholding
New version available
Render Studio
Bouton Nom Action
Render scene Render the current scene to a document tab, or Download image to save the render as a JPEG or PNG file in the Documents folder on the local computer.
Transformer Opens the Transform dialog and a transform manipulator.
Projecteur Creates a projector in the scene.
Associer les propriétés de la scène Match all scene properties of the current Render Studio tab to those in another Render Studio tab, including Scene settings, Environment settings, and Named views.
Volume Add a cubic region that defines and renders the volumetric portion of an appearance, optionally using an OpenVDB 3D texture. Render Studio Advanced only. Non-advanced users can view Volumes, but with non-editable properties.
Lumière Add a light source with position and direction. Choose from Diffuse, Spot, and Profile light distributions, and optionally use a surface area to create softer shadows. Render Studio Advanced only,
Fonctions d'apparence Add appearance functions to the scene to control or modify material and visual properties.
Modifiers Add modifiers to alter or customize the behavior and properties of scene elements.

Right panel

Bouton Nom Action
Apparence The Appearance is material-specific (for example, Fabric, Glass, or Masonry), and the available panel parameters change, depending on the selected Appearance.
Environment displays an editable list of parameters for the scene environment. The available panel parameters change, depending on the selected Environment.
Camera displays an editable list of parameters for the Camera directed at the selected object, such as Field of view, Focal length, Position, Rotation, Background, Depth of Field, Exposure, Tone and contrast, Vignetting, and other Advanced options.
Scene displays an editable list of global parameters for the Scene list.
Indicateur Définition
Indicates a top level Render Studio scene
Icône Atelier des pièces Indicates a Part Studio
Indicates a configured Part Studio

Icône Assemblage

Indicates an Assembly or subassembly
Indicates a configured Assembly or subassembly
Icône Pièce ou Surface Indicates a Part
Indicates a configured part
Indicates a surface or face (mesh)
Indicates an Assembly folder
Indicates a Projector
Indicates a tessellation value other than Auto is applied
Indicates the scene list entity is shown / hidden
Indicates an entity transform (translate)
Indicates an entity transform (rotate)
Indicates an entity transform (scale)
Indicates an appearance
Indicates a linked appearance
Indicates a decal
Indicates a linked decal
Indicates a Volume (Render Studio Advanced only)
Indicates a Light (Render Studio Advanced only)
Document
Bouton Nom Action
Owned by me Displays documents owned by the current user.
Recently opened If the enterprise or company filter is selected, this section displays those documents most recently opened by the current user. This section is collapsible.
Created by me Displays documents created by the current user.
Shared with me Displays documents shared with the current user.
Étiquettes Click the Create new label icon (Add label button icon) to create and name a new Onshape label.
Public Displays all public documents.
Corbeille The Trash filter lists all documents that you have sent to trash (deleted). Any documents you delete from the trash, and all those present in trash when you click Empty Trash, are deleted forever. Rright-click on any item in trash to Restore it.
Document Click to create and name a new Onshape document and optionally apply an existing label. You can also create a new document using cad.onshape.com/new.
Dossier Click to create and name a new Onshape folder. See Folders for more information.
Pièce Pièce
Assemblage Assemblage ou sous-assemblage
Dessin Drawing
Publication Click to create and name a new Onshape publication. See Publications for more information.
Import files Click to import external files into Onshape.
Import from Click to import files from Google Drive, Dropbox, or Microsoft OneDrive into Onshape.
Project (Enterprise accounts only) Click to open the Create new project dialog box to specify the name, description, permission scheme of your project, and access. This option is available for any user who has been granted Global permission.
Sort Select a sort option for the project and folder grid.
Affichage Grille des dossiers Displays the projects and folders section as a thumbnail grid view (default):
Affichage Liste des dossiers Displays the projects and folders section as a list view:
Document view Default view for all subscriptions. Shows all documents in your enterprise or company in a flat list. Click the Type button to select what is displayed: Show all, Documents, or Publications.
List view View the latest released and revisioned parts, Assemblies/subassemblies, and Drawings in each folder. Filter data in Onshape based on your product's structure. See List view for more information.
Structure view View the latest released and revisioned models and all associated parts, assemblies, and drawings in a tree list, presenting the information from the top level assembly downward. See Structure view for more information.

Document

Indicator Definition
Indicates the document was created by an Education subscriber.
Indicates one or more workspaces are updating. The document is available once the update finishes.
Indicates one or more workspaces are scheduled to update.
Indicates the document has associated items, such as drawings. Click to expand them.
Indicates you are the educator for the classroom.
Indicates the item comes from an external connection shared by another company.

Tab

Indicator Definition
Indicates the tab references a linked document, and a newer version is available.
Indicates the tab references a linked document in which only locked (pinned) children are out of date.
Indicates a child of the tab references a linked document for which a newer version is available.
Indicates a child of the tab has only locked (pinned) references that are out of date.
Indicates the tab's derived or linked reference is out of sync with its source.

Release and revision state

Indicator Definition
Indicates the item is released at the latest revision.
Indicates the item is released, but not at the latest revision.
Indicates the item's revision is pending approval.
Indicates the item's revision is obsolete.
Indicates the element has a published FeatureScript version.
Indicates a version of the document.
Indicates a workspace rather than a version.