等傾線

在圖形區域中至少有一個傾斜面的情況下：

1. 按一下 。

   

2. 選擇您要於其上加入等傾線的一或多個面。
3. 選擇等傾線方向的參考。如果需要，使用方向箭頭圖示來變更等傾線的方向。
4. 設定與參考之間的角度來計算等傾線。
5. 選擇分割選項來沿著等傾線分割面。
6. 按一下 。

您無法顯示/隱藏與等傾線相關聯的特徵；請改用零件清單中顯示/隱藏的功能。

In addition to the surfacing tools, curves are used to create the basic building blocks of surfaces.

This lists the collection of curve feature tools. This is not an exhaustive list. Additional Feature tools may be used when manipulating curves.

• Sketch tools - Tools in the Sketch toolbar such as Line, Corner rectangle, Center point rectangle, Center point circle, 3 point circle, Tangent arc, 3 point arc, Spline, Point, and Construction used to create a sketch in a Part Studio.
• Helix - Create a helix using a conical or cylindrical face, single axis or z-axis of a mate connector, or circular edge.
• 3D fit spline - Create a 3D fit spline through a series of vertices. Creates a curve which is listed in the Parts list under Curves.
• Projected curve - Create a curve from the projection of two sketches (Two sketches option) or from the projection of a curve on a face (Curve to face option).
• Bridging curve - Create a Curve connecting any two points, vertices, or Mate connectors. The resulting Curve is listed in the Feature list and the Parts list.
• Composite curve - Represent multiple edges as one Curve. Select multiple adjacent edges, sketch entities, and other curves. Selecting non-contiguous edges may result in multiple Curves created. Selections for each Curve must meet at their vertices. (Curves are listed in the Parts > Curves list.)
• Intersection curve - Create a curve at the intersection of two or more surfaces or faces. The selections must intersect.
• Trim curve - Trim or extend a curve by a distance or to a bounding entity.
• Isocline - Create an isocline on a sloped face. An isocline runs on a face at positions where the face has a certain slope compared to its reference definition. The resulting isocline is listed in the Feature list and Parts list.
• Offset curve - Create and extend and/or split a new curve by offsetting edges on surrounding faces.
• Isoparametric curve - Create smooth curves that run along a face or surface in the U or V direction.

在圖形區域中至少有一個傾斜面的情況下：

1. 輕觸 。

   

2. 選擇您要於其上加入等傾線的一或多個面。
3. 選擇等傾線方向的參考。如果需要，切換「相反方向」按鈕來變更等傾線的方向。
4. 設定與參考之間的角度來計算等傾線。
5. 切換分割面選項來將面沿著等傾線分割。
6. 輕觸核取記號。

您無法顯示/隱藏與等傾線相關聯的特徵；請改用零件清單中顯示/隱藏的功能。