This functionality is available on Onshape's browser, iOS, and Android platforms.

This lists all of the standard content Onshape provides for your convenience. If the standard content you require is listed here, you don't have to model it - you can simply use the Insert parts and assemblies dialog to select the standard content you need. Check back here often to see what is available, since Onshape updates this list often.

ANSI


Bolts & ScrewsCopy link

Countersunk bolts

Countersunk bolt, Countersunk square neck bolt

Set screws (hex socket)

Oval point hex socket set screw, Half dog point hex socket set screw, Flat point hex socket set screw, Cup point hex socket set screw, Cone point hex socket set screw

Set screws (square head)

Oval point square head set screw, Half dog point square head set screw, Flat point square head set screw, Dog point square head set screw, Cup point square head set screw, Cone point square head set screw

Set screws (slotted)

Oval point slotted headless set screw, Half dog point slotted headless set screw, Flat point slotted headless set screw, Dog point slotted headless set screw, Cup point slotted headless set screw, Cone point slotted headless set screw

Socket head screws

Socket countersunk head cap screw, Socket button head cap screw, Socket head cap screw, Socket head shoulder screw

Lag screws

Hex lag screw, Square lag screw

T-head bolts

T-head bolt

Square head bolts

Askew head bolt, Countersunk elevator bolt, Square head bolt

Round head bolts

Round head ribbed neck bolt, Round head step bolt, Round head fin neck bolt, Round head short square neck bolt, Round head square neck bolt, Round head bolt

Tapping screws

Oval countersunk trim head tapping screw, Hex washer head tapping screw, Pan head tapping screw, Hex head tapping screw, Fillister head tapping screw, Flat countersunk trim head tapping screw, Oval countersunk head tapping screw, Oval undercut countersunk head tapping screw, Flat undercut countersunk head tapping screw, Flat countersunk head tapping screw

Machine screws

Round head machine screw, Truss head machine screw, Flat countersunk head (100) machine screw, Binding head machine screw, Fillister head machine screw, Flat countersunk head (82) machine screw, Hex head machine screw, Hex washer machine screw, Oval countersunk head machine screw, Pan head machine screw

Hex bolts

Hex cap screw, Hex flange bolt, Hex bolt, Heavy hex structural bolt, Heavy hex finished bolt, Heavy hex bolt

Miniature screws

Pan head miniature screw, Countersunk flat head miniature screw, Fillister head oval crown miniature screw, Fillister head chamfered miniature screw, Binding head miniature screw

NutsCopy link

Hex slotted nuts

Hex slotted nut, Hex thick slotted nut, Heavy hex slotted nut

Cap nuts

Acorn high, Acorn low crown nut, Acorn high crown nut

Hex nuts

Hex jam nut, Hex thick nut, Hex nut, Hex flange nut, Heavy hex nut, Heavy hex jam nut

T-slot nuts

T-slot nut

Square nuts

Square nut, Heavy square nut

Machine screw nuts

Square machine screw nut, Hex machine screw nut

Hex flat nuts

Hex flat nut, Hex flat jam nut, Heavy hex flat nut, Heavy hex flat jam nut

WashersCopy link

Spring lock washers

Extra-duty spring lock washer, Regular spring lock washer, High collar spring lock washer, Heavy-duty spring lock washer

Toothed lock washers

Type B internal/external tooth lock washer, Type B heavy internal tooth lock washer, Type B external tooth lock washer, Type A internal/external tooth lock washer, Type A heavy internal tooth lock washer, Type A external tooth lock washer, Type B internal tooth lock washer, Type A internal tooth lock washer

Type A plain washers

Type A flat washer

Type B plain washers

Type B wide flat washer, Type B regular flat washer, Type B narrow flat washer

Pins & StudsCopy link

Dowel & straight pins

Taper pin, Hardened ground machine dowel pin, Hardened ground production dowel pin, Ground dowel pin, Straight pin

Spring pins

Slotted spring pin

Cotter pins

Grooved T-head cotter pin

Studs

Round-head grooved drive stud

Retaining RingsCopy link

Internal retaining rings

Internal retaining ring

External retaining rings

External retaining ring

Shaft KeysCopy link

Parallel key

Standard parallel key ANSI B17.1

Tapered key

Tapered key ANSI B17.1

DIN


Bolts & ScrewsCopy link

Cross recess head screws

PH Pan head cross recess screw with collar DIN 967, PZ Raised countersunk head screw DIN EN ISO 7047, PH Raised countersunk head screw DIN EN ISO 7047, PZ Countersunk flat head screw DIN EN ISO 7046-1, PH Countersunk flat head screw DIN EN ISO 7046-1, PZ Pan head screw DIN EN ISO 7045, PH Pan head screw DIN EN ISO 7045, PZ Pan head cross recess screw with collar DIN 967

Self-tapping screws

Cross recessed oval head raised countersunk tapping screw DIN 7051, Cross recessed flat head countersunk tapping screw DIN 7050, Cross recessed pan head tapping screw DIN EN ISO 7049, Cross recessed pan head tapping screw with collar DIN 967

Miscellaneous bolts

Wing screw DIN 316

Slotted head screws

Slotted pan head screw with shoulder DIN 923, Slotted raised countersunk head screw DIN EN ISO 2010, Slotted countersunk flat head screw DIN EN ISO 2009, Slotted pan head screw DIN EN ISO 1580, Slotted cheese head screw DIN EN ISO 1207

Square head bolts

Square head bolt collar and dog point DIN 480, Square head bolt with short dog point DIN 479, Square head bolt with collar DIN 478

Socket head screws

Hex socket head cap screw DIN 912, Hex socket head cap screw DIN 7984, Hex socket head countersunk screw grade C DIN 7991

Eye bolts

Eye bolt DIN 444, Lifting eye bolt DIN 580

Set screws (hex head)

Hex set screw fine pitch with full dog point DIN 561, Hex set screw with full dog point DIN 561, Hex set screw fine pitch with half dog point and flat cone point DIN 564, Hex set screw with half dog point and flat cone point DIN 564

Set screws (hex socket)

Hex socket set screw with cone point DIN 914, Hex socket set screw with dog point DIN 915, Hex socket set screw with flat point DIN 913, Hex socket set screw with cup point DIN 916

Set screws (slotted)

Slotted set screw with cone point DIN EN 27434, Slotted set screw with dog point DIN EN 27435, Slotted set screw with flat point DIN EN 24766, Slotted set screw with cup point DIN EN 27436

Hex head bolts & screws

Hex bolt structural short grade C DIN 6914, Hex head structural bolt DIN 7990, Hex head bolt grade C DIN EN 24016, Hex head screw grade C DIN EN 24018, Hex head bolt grade C DIN 931-2, Hex head bolt grade B DIN EN 24015, Hex head bolt grade A & B fine pitch DIN EN 28765, Hex head screw grade A & B fine pitch DIN EN 28676, Hex head bolt grade A & B DIN EN 24014, Hex head screw grade A & B DIN EN 24017

PinsCopy link

Parallel pins

Parallel pin DIN EN ISO 8734, Parallel pin ISO 8734

NutsCopy link

Hex nuts

Hex nut style 2 grade A & B DIN EN 24033, Hex nut style 2 grade A & B fine pitch DIN EN 28674, Hex thin nut fine pitch grade A & B DIN EN 28675, Hex thin nut grade A & B DIN EN 24035, Hex nut style 1 grade C DIN EN 24034, Hex nut style 1 grade A & B fine pitch DIN EN 28673, Hex nut style 1 grade A & B DIN EN 24032

Square nuts

Square nut grade C DIN 557, Square weld nut DIN 928, Square thin nut grade B DIN 562

WashersCopy link

Lock washers

Spring lock washer DIN 127 Type A, Spring lock washer DIN 127 Type B, Conical spring lock washer DIN 6908, Conical spring lock washer DIN 6796

Retaining RingsCopy link

Internal retaining rings

Internal retaining ring DIN 472, Internal heavy retaining ring DIN 472

External retaining rings

External retaining ring DIN 471, External heavy retaining ring DIN 471

Shaft KeysCopy link

Parallel key

Parallel key 6885-1

Tapered key

Tapered key 6883

Stressed tapered key

Stressed tapered key 6886

ISO


Bolts & ScrewsCopy link

Hex head bolts & screws

Hex bolt structural short grade C ISO 7412, Hex head bolt grade A & B fine pitch ISO 8765, Hex head screw grade A & B fine pitch ISO 8676, Hex structural bolt grade C ISO 7411, Hex flange bolt small ISO 4162, Hex head screw grade C ISO 4018, Hex head screw grade A & B ISO 4017, Hex head bolt grade C ISO 4016, Hex head bolt grade B ISO 4015, Hex head bolt grade A & B ISO 4014

Socket head screws

Socket button head screw ISO 7380, Socket head shoulder screw ISO 7379, Hex socket head cap screw ISO 4762, Hexalobular socket pan head screw ISO 14583, Hex socket countersunk head screw ISO 10642, Hexalobular socket cheese head screw ISO 14580

Set screws (hex socket)

Cone point hex socket set screw ISO 4027, Cup point hex socket set screw ISO 4029, Dog point hex socket set screw ISO 4028, Flat point hex socket set screw ISO 4026

Set screws (slotted)

Cup point slotted set screw ISO 7436, Dog point slotted set screw ISO 7435, Cone point slotted set screw ISO 7434, Flat point slotted set screw ISO 4766

Cross recess head screws

PZ Raised countersunk head screw ISO 7047, PH Raised countersunk head screw ISO 7047, PZ Countersunk flat head screw ISO 7046-1, PH Countersunk flat head screw ISO 7046-1, PZ Pan head screw ISO 7045, PH Pan head screw ISO 7045

Slotted head screws

Slotted raised countersunk head screw ISO 2010, Slotted countersunk flat head screw ISO 2009, Slotted pan head screw ISO 1580, Slotted cheese head screw ISO 1207

Self-tapping screws

Hexalobular socket countersunk self-tapping screw ISO 14586, Hexalobular socket pan head self-tapping screw ISO 14585

NutsCopy link

Prevailing torque nuts fine pitch

Prevailing torque nut fine pitch ISO 10513, Prevailing torque nut fine pitch ISO 10512, Prevailing torque flange nut fine pitch ISO 12126, Prevailing torque flange nut fine pitch ISO 12125

Hex nuts fine pitch

Hex thin nut grade A & B fine pitch ISO 8675, Hex nut grade A & B fine pitch ISO 8674, Hex nut grade A & B fine pitch ISO 8673

Hex nuts

Hex nut structural grade A & B ISO 7413, Hex thin nut grade A & B ISO 4035, Hex structural nut grade A ISO 7417, Hex structural nut grade B ISO 7414, Hex structural nut grade B ISO 4775, Hex flange nut ISO 4161, Hex nut grade A & B ISO 4033, Hex nut grade C ISO 4034, Hex nut grade A & B ISO 4032

Prevailing torque hex nuts

Prevailing torque nut ISO 7720, Prevailing torque regular nut ISO 7719, Prevailing torque flange nut ISO 7044, Prevailing torque flange nut ISO 7043, Prevailing torque high nut ISO 7042, Prevailing torque nut ISO 7041, Prevailing torque nut ISO 7040, Prevailing torque nut thin ISO 10511

WashersCopy link

Plain washers hardened

Chamfered plain washer hardened ISO 7416, Plain washer hardened ISO 7415

Plain washers

Plain washer extra large grade C ISO 7094, Plain washer small grade A ISO 7092, Plain washer normal grade C ISO 7091, Chamfered plain washer normal ISO 7090, Plain washer small grade A ISO 10673, Plain washer normal grade A ISO 10673, Plain washer large grade A ISO 10673, Clevis pin plain washer ISO 8738, Plain washer large grade A ISO 7093-1, Plain washer normal grade A ISO 7089

O-ringsCopy link

O-rings

ISO 3601-1 O-rings for industrial applications, ISO 3601-1:2012 O-rings for aerospace applications

NAS


Sheet Metal FastenersCopy link

Clinch nuts

Self-locking clinch nut with self-locking threads NASM 45938, Self-locking clinch nut without self-locking threads NASM 45938, Hex head self-locking clinch nut NASM 45938/2

Flush nuts

Self-clinching flush nut NASM 45938/4, Plain clinch flush nut NASM 3214

Standoffs

Self-clinching blind standoff NAS 1129, Self-clinching thru standoff NAS 1129

 

PEM®


UnifiedCopy link

Self-clinching nuts

CLA™ Self-clinching nuts, HNL™ Prevailing torque locknuts, H™ NutsS-RT™ Free-running locknuts, SH™ Hard panel nuts, SL™ TRI-DENT® Prevailing torque locknuts, SMPS™/SMPP™ Nuts (For thin sheets), S™/SS™/CLS™/CLSS™/SP™ Self-clinching nuts

Self-clinching studs

FH™/FHS™/FHA™ Flush-head studs, FH4™/FHP™ Flush-head studs for stainless steel sheets, FHL™/FHLS™ Flush, Low-displacement head studs, HFH™/HFHS™/HFHB™ Heavy-duty studs, HFE™/THFE™ Heavy-duty studs for thin sheets, HFG8­­™ Heavy-duty, high tensile strength studs, HFLH™ Hard panel studs, SGPC™ Swaging collar studs, TFH™/TFHS™ Non-flush studs

Self-clinching pins

FH™/FHS™/FHA™ Flush-head pins, TPS™/TP4™ Flush-head pilot pins

Self-clinching standoffs

BSO™/BSOS™/BSOA™/BSO4™ Blind threaded standoffs, DSOS™/DSO™ Threaded standoffs (for close-to-edge applications), SOSG™/SOAG™ Grounding standoffs, SO™/SOS™/SOA™/SO4™ Through-hole threaded standoffs, SO™/SOS™/SOA™/SO4™ Through-hole unthreaded standoffs, TSO™/TSOS™/TSOA™/TSO4™ Threaded standoffs for thin sheets

MetricCopy link

Self-clinching nuts

CLA™ Self-clinching nuts, HNL™ Prevailing torque locknuts, H™ Nuts, S-RT™ Free-running locknuts, SH™ Hard panel nuts, SL™ TRI-DENT® Prevailing torque locknuts, SMPS™/SMPP™ Nuts (For thin sheets), S™/SS™/CLS™/CLSS™/SP™ Self-clinching nuts

Self-clinching studs

FH™/FHS™/FHA™ Flush-head studs, FH4™/FHP™ Flush-head studs for stainless steel sheets, FHL™/FHLS™ Flush, Low-displacement head studs, TFH™/TFHS™ Non-flush studs, HFE™/THFE™ Heavy-duty studs for thin sheets, HFH™/HFHS™/HFHB™ Heavy-duty studs, HF109­­™ Heavy-duty, high tensile strength studs, HFLH™ Hard panel studs, SGPC™ Swaging collar studs, FHX™ Flush-head studs with X-Press™ thread profile

Self-clinching pins

FH™/FHS™/FHA™ Flush-head pins, TPS™/TP4™ Flush-head pilot pins, TPXS™ Self-clinching pilot pins

Self-clinching standoffs

BSO™/BSOS™/BSOA™/BSO4™ Blind threaded standoffs, DSOS™/DSO™ Threaded standoffs (For close-to-edge applications), SOSG™/SOAG™ Grounding standoffs, SO™/SOS™/SOA™/SO4™ Through-hole threaded standoffs, TSO™/TSOS™/TSOA™/TSO4™ Threaded standoffs for thin sheets, SO™/SOS™/SOA™/SO4™ Through-hole unthreaded standoffs

SAE


O-ringsCopy link

All O-rings

AS568 O-rings

How to request standard content


If you'd like to request that Onshape add particular standard content to our list, use one of these methods: