Mirror

1. Click .

   

2. Select the Result operation type:
   • Part - Mirror an individual part or surface
   • Feature - Mirror a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, etc). Note that Feature does not work for sheet metal; see the Face pattern type for sheet metal modifications.
   • Face - Mirror a specific face on a specific part or surface
3. Select Result operation type:
   • New - Create new material that results in a new part.
   • Add - Create material added to the existing material.
   • Remove - Take material away from a part.
   • Intersect - Leave material only where intersections exist.
4. With the focus on the Entities to mirror field, select entities to mirror.

   When selecting Faces to mirror, the Create Selection can be useful to select related faces.

5. Click in the Mirror plane field to give it focus, then select the plane, planar face or mate connector (inferred or existing) about which to mirror. Click the in order to select inferred Mate connectors.

   Once a Mate connector is selected, click the Mate connector icon in the dialog field (outline in blue below) to open a dialog with which to edit the Mate connector:

   

   Notice that with the slider towards the right, you get an instant preview of the result.

6. (Feature type only) Select Reapply features to regenerate part(s) from the selected feature(s), inclusive of feature dependencies.

   In a sketch, the seed sketch dimensions and constraints to the origin or default plane will not be reapplied. You can use this behavior to scope which dimensions or constraints are reapplied within a mirror:

   • You can mirror sketch features that are dimensioned or constrained to the origin or default planes and choose not reapply those dimensions and constraints.
   • You can also create explicit construction sketches along the default planes or origin when reapplying features along them.

7. Select whether to merge the new entity with other entities that touch or intersect its geometry:
   • If the geometry touches or intersects with only one part then that part is automatically added to the merge scope.
   • If multiple parts touch or intersect the geometry, then there is ambiguity and you must select which parts to merge with (the merge scope).
   • A shortcut to selecting multiple touching or intersecting parts, you can check Merge with all to add all touching or intersecting parts to the merge scope.

   Note that if the Boolean is set to Add, Remove, or Intersect and nothing is set in the merge scope, the feature will result in an error. For New, no merge scope is available since New does not boolean the result.

8. Click .

Mirror an individual part

This part is mirrored across a plane to add material to the existing material:

Mirror a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, sketch, etc)

This Extrude Remove feature is mirrored across the plane to remove material from the part:

When mirroring a feature, an additional Reapply features option is available. Check this option to regenerate part(s) from the selected feature(s), inclusive of feature dependencies. Note that in a sketch, dimensions and constraints from the seed sketch to the origin or a default plane will not be reapplied.

Mirror a specific face (or faces) on a specific part.

Several faces are mirrored across the plane to add material to the existing part:

New - Create material that results in a new part:

Add - Create material added to the existing material:

Add material to a sheet metal part:

Take material away from existing material:

Leave material only where geometry overlaps

Before:

After:

1. Tap Mirror tool.

   

   

2. Select the mirror type:
   • Part mirror - To mirror an individual part
   • Feature mirror - To mirror a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, sketch, etc.)
   • Face mirror - To mirror a specific face on a specific part
3. Select result body operation type:
   • New - Create new material that results in a new part.
   • Add - Create material added to the existing material.
   • Remove - Take material away from a part.
   • Intersect - Leave material only where intersections exist.
4. Select entities to mirror.
5. Tap in the Mirror plane field, then select the plane, planar face, or mate connector about which to mirror. Optionally, tap the Mate connector icon to select or create inferred Mate connectors.
6. Tap the checkmark.

Mirror an individual part.

A part is mirrored across the Right plane to add material to the existing material.

Mirror a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, sketch, etc.).

An extrude remove feature is mirrored across the Right plane to remove material from the existing part.

Mirror a specific face on a specific part.

Several faces are mirrored across the Right plane to add material to the existing part.

New - Create new material that results in a new part.

Add - Create material added to the existing material.

Take material away from a part.

Leave material only where intersections exist.

Before Mirror intersect:

After Mirror intersect:

1. Tap Mirror tool.

   

   

2. Select the mirror type:
   • Part mirror - To mirror an individual part
   • Feature mirror - To mirror a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, sketch, etc.)
   • Face mirror - To mirror a specific face on a specific part
3. Select result body operation type:
   • New - Create new material that results in a new part.
   • Add - Create material added to the existing material.
   • Remove - Take material away from a part.
   • Intersect - Leave material only where intersections exist.
4. Select entities to mirror.
5. Select mirror plane.
6. Tap the checkmark.

Mirror an individual part.

A part is mirrored across the Right plane to add material to the existing material.

Mirror a specific feature (or features) listed in the Feature list (an extrude, fillet, sweep, sketch, etc.).

An extrude remove feature is mirrored across the Right plane to remove material from the existing part.

Mirror a specific face on a specific part.

Several faces are mirrored across the Right plane to add material to the existing part.

New - Create new material that results in a new part.

Add - Create material added to the existing material.

Take material away from a part.

Leave material only where intersections exist.

Before Mirror intersect:

After Mirror intersect: